T2 Wireless Transmitter
World class sound should not be limited by wires! Questyle Audio presents the World’s First, Hi-end 5GHz Wireless Audio System! A completely new stage of evolution for wireless audio, Questyle Audio's worldwide PCT patented, 5GHz Wireless Audio System offers the most stable wireless transmission, yet achieved, for a HiFi system.
The Questyle Audio 5GHz Wireless Audio System series consists of a Wireless Transmitter/Controller (Preamplifier) and a Wireless Receiver/DAC/Amplifier. Currently there are three models: the T2 Wireless Transmitter/Controller, the R100 (2x50W Stereo) Wireless Amplifier and the R200 (200W Mono) Wireless Amplifier.
The Questyle Audio 5GHz Wireless Audio System, integrates Wireless Transmission (transmitting uncompressed 24bit/22M audio signal in the 5.2GHz/5.8GHz frequency band), digital to Analog conversion and Power Amplification to maximize high fidelity sound performance, in its purest form, while simplifying the setup of a Hi-end audio system.
Current 2.4GHz wireless audio systems set people free from unsightly and impractical cable connections, but there is an obvious shortcoming, in that, there are countless Wi-Fi setups, broadcasting in the 2.4GHz frequency range, which repeatedly cause interrupted, delayed or weakened signal. To achieve absolutely stable wireless transmission, Questyle Audio innovatively designed the 5GHz wireless system, transmitting audio signals in the 5.2GHz/5.8GHz frequency band, wonderfully avoiding the crowded 2.4GHz frequency range and achieving the most stable transmission to date.
Most importantly, the Questyle Audio 5GHz Wireless Audio System supports a stable real time playback, which is beyond the capability of other wireless systems.
The Questyle Audio R100 and R200 Wireless Amplifiers
The Questyle Audio R100 and R200 Wireless Amplifiers are actually an integration of wireless receiver, DAC and amplifier. The Questyle Audio R100 Wireless Amplifier is a 50W per channel stereo amplifier, whereas, the Questyle Audio R200 Wireless Amplifier is a 200W Mono block switchable between left and right channel via a switch on the bottom of the R200. The Questyle Audio R200, with its high power output (an incredible 20A output current capacity), is able to drive even the most demanding of speaker systems. The Questyle Audio R100 and R200, both feature modified Danish ICEpower Class D amplification modules with an ultra-low distortion of 0.004%, and a Signal to Noise Ratio of 104db, as well as the legendary Wolfson DAC chip to ensure the highest sound performance possible.
Bi-amp and Tri-amp Performance
Because multiple receivers are supported, up to 8 receivers per T2 transmitter, with only an 8ms delay, speaker systems requiring more than 200W output power, can easily be accommodated through a bi-amp or tri-amp configuration.
There are many speakers that have separate connections for high, mid and low frequency. To upgrade the sound performance, two or three pairs of R200 amplifiers can be used to separately drive HF, MF and LF. The power of each channel increases to 400W(2*200W) or 600W(3*200W) to improve hi-end performance.
Upgrade a Home Theater System
Multi-channel surround home theater set up can be simplified by using the Questyle Audio 5GHz Wireless Audio System to power surround and rear channels, without having to run wires. This is especially helpful in finished rooms where it is not practical or even possible to run wires through the wall or under the floor. Plus, since transmission is done in the digital domain, there is none of the signal denigration or power loss, usually associated with long speaker wire or interconnect runs.